Bare metal programming

LDD

Location: Bangalore

Job Description:

• Kernel & Embedded
• Strong C programming for Linux kernel development
• Solid understanding of Linux kernel internals
• Experience with device driver frameworks
• Knowledge of synchronization mechanisms (mutex, spinlock, atomic ops)
• Familiarity with Yocto / Buildroot
• Validation & C++
• Strong C++ (C++11 or later) programming skills
• Experience with unit and system testing frameworks (e.g., Google Test, Catch2)
• Experience in test automation
• Ability to design reusable validation libraries

Experience (years) : 5-10 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Synthesis Engineer

Location: India (Hybrid/Onsite)

Job Description:

• Perform RTL-to-GDS synthesis for complex SoC/IP blocks.
• Achieve timing, power, and area (PPA) targets.
• Handle timing closure and work closely with design teams for logic optimizations.
• Collaborate with Physical Design (PD) teams on floorplan and constraint updates.
• Develop, port, and maintain SDC constraints across projects.
• Ensure clean CLP, LEC/FV, and synthesis sign-off.
• Review incoming and outgoing collaterals using quality checklists.
• Analyze and resolve synthesis issues related to QoR, constraints, and libraries.
• Support PNR timing closure by updating constraints and ECOs as required.

Experience (years) : 4+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Physical Design Engineer- Innovus Expert.

Location: India (Hybrid/Onsite)

Job Description:

• Must hands on experience with a solid complex (SOC/sub-systems/SWRPs) implementation and strong understanding in PG/floorplan and physical design flows and methodologies, place and route using tools such as Innovus & FC
• Strong scripting skills in Innovus- TCL, and Python/Perl(optional)
• Top down floorplan and Power Grid understanding for development methodology is a must
• Experience with signoff convergence(STA, EMIR, PV) of the implemented subsystem
• Block level Timing Signoff and ECO generation
• Block level Power signoff
• Good skill on Automation (Perl/Tcl/Awk/Python
• Good in communication skill as he/she would be single point of contact for client.

Experience (years) : 4+ years

Education Qualification:

BTech/ MTech  Electrical/Electronics/Computer Science Engineering or Equivalent.

Physical Design Lead

Location: India (Hybrid/Onsite)

Job Description:

• Own complete RTL-to-GDSII flow: floorplan, place, CTS, route, signoff
• Drive PPA optimization, timing, SI, IR/EM closure
• Lead and mentor a team of PD engineers; manage schedules and deliverables
• Interface with RTL, DFT, STA, Verification, Foundry, and Signoff teams
• Handle ECOs, tapeout readiness, and design reviews
• Improve PD methodologies, flows, and automation

Job Requirement:

• Strong hands-on PD expertise with Innovus / ICC2 / FusionCompiler / Tempus / PrimeTime /Etc.
• Experience in 28nm to 3nm nodes
• Solid scripting skills (TCL, Python/Perl/Shell)
• Proven ownership of block or full-chip tapeouts

Experience (years) : 10 - 12 years

Education Qualification:

BTech/ MTech  Electrical/Electronics/Computer Science Engineering or Equivalent.

Formal Verification

Location: Hyderabad

Job Description:

• Strong experience in Formal Verification methodologies
•  Hands-on expertise in SystemVerilog Assertions (SVA)
•  Solid understanding of RTL design and micro-architecture
•  Experience with equivalence checking (LEC/SEC)
•  Knowledge of CDC/RDC verification
•  Good debugging skills using counterexamples and traces

Job Requirement:

• Jasper Gold experience, CC checks, Property checks and IOMUX verification

Experience (years) : 4-10 yrs

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

FPGA Engineer

Location: Hyderabad

Job Description:

• Strong in digital design.
• Strong in Xilinx Vivado IP & IPI tools till bit-generation.
•  Knowledge of VHDL/Verilog/System Verilog.
•  Knowledge of Validating IP/IP Example designs on Xilinx boards, debugging of failures on target boards, board bring up.
•  Proficiency in Linux environment.
•  Good communication skills.

Experience (years) : 3-6 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Validation Engineer

Location: Hyderabad

Job Description:

• Good knowledge of Vivado, HDL
• Familiar with Vitis.
• Having C knowledge and experience in building BareMetal application is big +ve

Job Requirement:

• Should be able to build IPI based system
• Should be able to design small debug modules, develop validation systems

Experience (years) : 4-6 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Design Verification(Ethernet/Wifi/BT)

Location: Pune

Job Description:

• Develop verification plans for Ethernet, Wi-Fi, and Bluetooth IPs
• Build and maintain SystemVerilog/UVM-based verification environments
• Verify protocol compliance and interoperability
•  Create directed and constrained-random tests
•  Develop SystemVerilog Assertions (SVA) and functional coverage
•  Debug complex protocol issues using waveforms, logs, and traces
•  Perform end-to-end data path verification and stress testing
•  Collaborate with RTL, firmware, architecture, and validation teams
•  Drive coverage closure (functional, code, assertion)

Experience (years) : 4+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Design Verification(High Speed Protocol)

Location: Bangalore

Job Description:

• PCIE/DDR/LPDDR/CXL/UCIE/Ethernet are good to have protocols, Arm experience, GLS
• Initial work at subsystem level followed by SoC level execution
• Expertise on Ethernet protocol/Expertise on packet processing in networking data path.
• High speed ethernet experience 400G+ is preferred.

Experience (years) : 4+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Design Verification (Cache)

Location: Bangalore

Job Description:

• Strong knowledge of cache architecture & memory hierarchy
• Hands-on experience with SystemVerilog & UVM
• Good understanding of SoC interconnects (AXI / ACE / CHI)
• Experience in protocol verification and debug
• Solid fundamentals in computer architecture
• Familiarity with coverage-driven verification methodologies

Experience (years) : 4+ years

Education Qualification:

BE/ME

Design Verification(SOC)

Location: Bangalore

Job Description:

• Verification engineer with a knowledge of SoC integration verification, SoC scenario verification, SoC performance verification, CHI/DDRx/LPDDRx/AI accelarator integration verification in SoC RTL.
• Your key responsibilities will include writing test plans, defining test methodologies, developing C based software tests, SystemVerilog/Verilog testbenches and tests, and debugging of test failures and issues.
• Working with project management and leads on planning tasks, schedules, and reporting progress
• Collaborate with engineers from other teams including architecture, design, implementation, modelling, performance analysis, silicon validation, FPGA and board development

Job Requirement:

Proven understanding of digital hardware verification language Verilog/System Verilog HDL.

Experience (years) : 5+ years

Education Qualification:

BE/ME

Design Verification(GLS)

Location: Bangalore

Job Description:

• Verification Engineer with over 4 years of experience in Gate-Level Simulation (GLS).
• Skilled in UVM, SystemVerilog, and industry-standard verification methodologies.
• Strong in debugging, timing analysis, and simulation to ensure design accuracy and performance.
• Key Skills HDL/HDVL: Verilog, System Verilog
• Tools: Synopsys VCS, Verdi, DVE GLS
• Expertise: Zero Delay (ZD), SDF, Power-Aware GLS (PAGLS)
• >Others: Low-Power Verification, RTL Debug, UVM Environments

Experience (years) : 4+ years

Education Qualification:

BE/ME

Design Verification Engineer

Location: Noida

Job Description:

• SOC Verification engineers with 3+ years of experience
• Knowledge of ARM architecture, CPU fundamentals & Cache coherency
• Experience with C/C++, assembly, and scripting languages.
• Familiarity with low-power design and verification
• Develop CDV UVM verification environments at system level
• Verify CPU connectivity to IP blocks
• Develop SoC test plans and test cases and track metrics including code and functional covera

Job Requirement:

• Bachelor’s or Master’s in EE/CS or related field
• 3+ years of SoC in ASIC/FPGA verification experience
• Proficiency in SV and UVM
• Experience with simulation, emulation, and formal verification
• Strong debugging and problem-solving skills

Experience (years) : 3+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Analog Layout

Location: Bangalore / Hyderabad

Job Description:

• TSMC 16/12nm,7nm,5nm,3nm and below (other foundries are also fine like Intel, Samsung, GF). Preferably TSMC 5nm/3nm experience.
• Responsible for Design and development of critical analog, mixed-signal, custom digital block and full chip level integration support.
• Verification flows – LVS/DRC/DFM/Antenna check/EMIR experience.
• Responsible for on-time delivery of block-level layouts of acceptable quality.
• Expertise in Cadence VLE/VXL and Mentor Graphic Caliber DRC/LVS is a must.
• BE or MTech in Electronics/VLSI Engineering
• Good communications skills as we work with cross-functional teams.
• Share the profiles who have good hands-on experience in recent times on lowers nodes.
• TM should work independently.
• 4 to 8 years of experience – flexible
• If a candidate has HBM experience, it is an added advantage. Analog blocks like Regulators/Charge pumps/Power Management etc..

Job Requirement:

TSMC 2nm or 3 nm

Experience (years) : 4-8 years

Education Qualification:

BTech

Analog Circuit Design

Location: Bangalore / Hyderabad

Job Description:

• High speed DDR IO Circuit Design JD: (Experience level 2 year to 6year)
• Strong fundamental in Circuit design. Knowledge of finfet.
• Work experience in high speed transreceiver, Prior work experience in high speed TX, RX.
• Knowledge of ESD, Latchup.
• Experience in layout related issue. Strong debug capability.
• Experience in .lib/Verilog view generation and validation.
• Scripting knowledge is Plus.

Experience (years) : 5-9 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

IO Layout

Location: Bangalore

Job Description:

• Very Good Knowledge on GPIO layouts and performing Layout verifications.
• Good Exposure to Technologies of GF 55nm , UMC 55nm , TSMC 28nm, TSMC 12nm etc.
• Should have Solid experience in Layout design and Verifications of all the blocks of a GPIO library like Driver, predriver, receiver, ESD clamps.
• Should be in position to technically drive the Layout Implementation starting with floorplanning, placement , IO ring Implementation , IO Bus design .
• Very good hands on knowledge on the Cadence Virtuoso layout verification suite relevant to the above mentioned technologies.
• Very good understanding of ESD & LU concepts and corresponding Layout Implementation strategies and challenges.
• Working (hands on) knowledge of Linux OS and Unix Shell & PERL scripting will be a plus.
• Good team player in a multi-site work environment
• Working knowledge with load sharing systems like LSF will be a plus. Very Good Knowledge on GPIO layouts and performing Layout verifications.
• Good Exposure to Technologies of GF 55nm , UMC 55nm , TSMC 28nm, TSMC 12nm etc.
• Should have Solid experience in Layout design and Verifications of all the blocks of a GPIO library like Driver, predriver, receiver, ESD clamps.
• Should be in position to technically drive the Layout Implementation starting with floorplanning, placement , IO ring Implementation , IO Bus design .
• Very good hands on knowledge on the Cadence Virtuoso layout verification suite relevant to the above mentioned technologies.
• Very good understanding of ESD & LU concepts and corresponding Layout Implementation strategies and challenges.
• Working (hands on) knowledge of Linux OS and Unix Shell & PERL scripting will be a plus.
• Good team player in a multi-site work environment
• Working knowledge with load sharing systems like LSF will be a plus.

Experience (years) : 4-9 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Memory Layout

Location: Bangalore

Job Description:

• 3-8 years of experience in Memory/Custom Layout design.
• Memory Leafcell layout library design from scratch including top level integration.
• Good knowledge on different types of memory architectures.
• Good knowledge in optimized layout design for better performance.
• Sound knowledge & hands on experience in Finfet technology, layout design and DRC limitations.

Job Requirement:

• TSMC 2 & 3 NM

Experience (years) : 5-7 years

STA

Location: India (Hybrid/Onsite)

Job Description:

• Should be very strong in Synthesis & Timing concepts
• Should understand .lib very well. Should be aware of all types of libs like NLDM, CCSM, ECSM etc.
• Should have knowledge of DC-topo of similar concepts in other tools (RTL Compiler, talus)
• Timing basics should be very strong
• Should understand the clocking structures and concepts very well.
• Should have handled both block and top level. Should know the concepts of budgeting other techniques to handle hierarchical designs
• Should have done both pre and post layout STA
• Should have basic knowledge of Formal verification, Spyglass

Experience (years) : 3+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

DFT Engineer

Location: India (Hybrid/Onsite)

Job Description:

• Hands on experience in Tessent DFT RTL insertion, DRC checks and debug is a must.
• Hands on experience on Scan Insertion, ATPG, GLS debug, MBIST pattern generation and validation.
• Working knowledge of timing enabled GLS and related debug.
• A basic understanding of DFT IPs like OCC, EDT, SSN, MBIST controllers, IJTAG, IEEE 1600 standard, and Boundary scan.
• Should be able to handle tasks independently.
• The candidate needs to have good debug skills and should be able to communicate related issues to the larger team.
• Working knowledge of TCL is an add-on.

Experience (years) : 4+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

AMS Verification

Location: Bangalore / Hyderabad

Job Description:

• Experience on verifying PMICs or Mixed-Signal products.
• Lead verification of analog and mixed-signal blocks, including but not limited to bandgaps, LDOs, Buck multi-phase switching regulators, comparators, and FuSa monitoring circuits.
• Own the verification plan for assigned blocks or features, ensuring thorough coverage and high-quality tests.
• Develop and/or update models of analog blocks using SV-RNM.
• Understand and verify digital functionalities such as CRC, Clock Monitoring, Register maps, and OTPs, Communication Interfaces.
• Understanding of SystemVerilog including assertions and covergroups.
• Advanced debug skills including RTL and Schematic debug from the top level.
• Create and manage VSIF files for regression.
• Ability to perform coverage analysis using IMC or vManager.
• Makefile scripting is a plus.
• Ability to work independently under broad direction.

Experience (years) : 3+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Design Verification Engineer

Location: Hyderabad

Job Description:

• Must have good knowledge on the verification flows
• Excellent hands-on debug skills and problem solving attitude.
• Experience of working in complex test-bench/model in Verilog, System Verilog or SystemC
• Experience of working on Functional Verification, SoC Verification, Emulation
• Good in programming : System Verilog, PLI/DPI interface, C/C++, PERL/Shell script, assembly language OVM/UVM Methodology knowledge and experience.
• Must have good communication skills and the ability to work in a team environment.
• Preferably having experience in architecture such as x86 or ARM domain based SOCs
• Having SOC/IP performance verification background is added plus

Job Requirement:

•Processor / PCI / DDR / Memory/C/C++

Experience (years) : 5-15 years

Education Qualification:

BE / ME

Design Verification Engineer

Location: Bangalore

Job Description:

• Working experience in IP/SoC/Subsystem/verification
• Strong understanding of computer architecture and ASIC design flow
• Experience in UVM
• Experience in Verilog and System Verilog languages
• Experience with PCIe/DDR/USB/Ethernet/CXL/HDMI/MIPI/DSI/CS/GLS/CPU Verification
• Experience with hands on IP integrations into SOC is a plus
• Excellent debug skills.
• Experience in assembly language or C is a plus
• Familiar with scripting (Python/Perl/Shell)
• Experience with assertion-based design strategies, code coverage, functional coverage and test plan development.
• Should have excellent communication skills (both written and oral)
• Strong problem-solving skills

 

Job Requirement:

• Bachelor’s or Master’s in EE/CS or related field
• 5+ years of SoC in ASIC/FPGA verification experience
• Proficiency in SV and UVM
• Strong debugging and problem-solving skills

Experience (years) : 5+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

ATE Engineer

Location: Bangalore

Job Description:

• Design, develop, and implement ATE solutions to automate testing for new and existing products
• Create test plans, procedures, and test cases based on product specifications and requirements.
• Write test software scripts using languages such as Python, C++, or similar to interface with ATE hardware.
• Troubleshoot and debug issues in test equipment and software to identify root causes and implement corrective actions.
• Perform analysis of test data and report findings to engineering teams for further improvements.
• Collaborate closely with hardware, firmware, and design teams to ensure test coverage and validation of key product features.
• Maintain and upgrade ATE systems to meet evolving testing needs

Job Requirement:

• Experience in Verigy93K- SMT8

Experience (years) : 3-10 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

PMIC Char

Location: Bangalore

Job Description:

• Provide post-silicon validation support, drive interactions with Design, Test, Product
• Quality Engineering to resolve product issues.
• Perform silicon evaluation at chip/board level and document errata to support necessary device modifications. Proficient in design-of-experiment to help isolate issues and get to root-cause on analog and mixed-signal products.
• Proficient with large-scale mixed-signal 5.PMIC(power management IC) such as bucks, boost, LDOs, ADC, GPIO, I2C, SPMI
• Proficient in automation using Python for automated measurements.
• Ability to run temperature characterization using thermal-stream and/or oven

Experience (years) : 4-12 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Functional Validation with Python scripting

Location: Bangalore

Job Description:

• Good at SoC topics
• Reset concepts
• Clock concepts
• Multiple COM protocols
• Python scripting
• Strong in C and C++, linkers, memory organization, resource partition and handling
• Added advantage of Perspec(Cadence Flow)
• Good at Silicon Debug

Experience (years) : 3-8 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Functional Validation

Location: Bangalore

Job Description:

• Strong Experience on programming in C
• Experience on system debug, embedded operating systems, or bare metal programming
• ARM CPU architecture knowledge
• Pre-Silicon(Emulation) , Post Silicon experience

Job Requirement:

• Experience on JTAG debuggers (e.g., Lauterbach)
• Familiarity with CPU uArch and coherent fabric
• Post silicon debug expertise.
• Familiarity with ARMv8/ARMv9

Experience (years) : 4-10 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

RTL ASIC SoC Architect / Lead RTL Design Engineer

Location: India (Hybrid/Onsite)

Job Description:

• System & Micro-Architecture Definition: Proven ability to translate product requirements and specifications into scalable, power- and performance-optimized micro-architectures.

• SoC Integration & Sub-System Ownership: Extensive experience in top-level SoC integration, clock/reset architecture, power domain planning, and cross-IP coordination.

• Bus Protocols & Interconnects: Strong expertise in industry-standard protocols such as AXI/AHB/APB, coherent interconnects (ACE/CHI preferred), and peripherals including PCIe, USB, Ethernet, CXL, and DDR.

• CPU & Memory Subsystems: Hands-on experience with CPU subsystem integration (ARM/ARC/RISC-V), cache hierarchy, MMU, and memory controller architectures (DDR, LPDDR).

• Low-Power Architecture: Deep understanding of low-power techniques including UPF/CPF, power gating, clock gating, DVFS, multi-voltage designs, and retention strategies.

• RTL Design & Coding Practices: Strong SystemVerilog RTL coding skills with emphasis on reuse, configurability, and synthesis-friendly design.

• Verification & Quality Sign-off: Ability to review and guide verification strategy, static checks test plans, functional coverage, assertions, and regression quality metrics.

• Synthesis, STA & Sign-off: Expertise in synthesis (Design Compiler), static timing analysis, timing closure across multiple PVT corners, and ECO handling.

• Formal & Equivalence Checking: Strong experience with formal verification and logical equivalence checking (LEC).

• DFT & Debug: Good working knowledge of DFT architectures (scan, MBIST, JTAG) and debug/trace infrastructures.

• Post-Silicon Bring-up: Experience with silicon bring-up, lab debugging, silicon validation, and correlation between RTL, simulation, and silicon behavior.

• Chip IO & Packaging: Understanding of chip IO planning, pad ring integration, signal integrity considerations, and packaging constraints.

• Cross-Functional Leadership: Ability to work closely with PD, DV, DFT, firmware, and software teams to ensure seamless execution and delivery.

• Mentoring & Technical Leadership: Proven capability to mentor engineers, review designs, drive best practices, and own delivery of complex SoC programs.

 

Job Requirement:

• SoC & Micro-Architecture: End-to-end Consumer SoC architecture and micro-architecture design optimized for PPA and real-world use cases.
• CPU & Interconnects: Integration of ARM/ARC/RISC-V CPU subsystems, cache hierarchies, AXI/AHB/APB, and coherent interconnects.
• Memory & High-Speed Interfaces: DDR/LPDDR subsystems and consumer interfaces such as PCIe, USB, Ethernet, CXL, MIPI, and display.
• Low-Power Design: Expertise in UPF-based low-power architecture, clock/power gating, DVFS, and multi-voltage domains.
• RTL, Verification & Sign-off: Strong SystemVerilog RTL, synthesis, STA/timing closure, formal (LEC), and DV/coverage review.
• Post-Silicon & Leadership: Silicon bring-up/debug experience with strong technical leadership and cross-functional collaboration.

 

Experience (years) : 10+ years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Design Verification Engineers

Location: Noida

Job Description:

• SOC Verification engineers with 3+ years of experience
• Knowledge of ARM architecture, CPU fundamentals & Cache coherency
• Experience with C/C++, assembly, and scripting languages.
• Familiarity with low-power design and verification
• Develop CDV UVM verification environments at system level
• Verify CPU connectivity to IP blocks
• Develop SoC test plans and test cases and track metrics including code and functional covera

Job Requirement:

• Bachelor’s or Master’s in EE/CS or related field
• 3+ years of SoC in ASIC/FPGA verification experience
• Proficiency in SV and UVM
• Experience with simulation, emulation, and formal verification
• Strong debugging and problem-solving skills

Experience (years) : 3+ Year

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

RTL Design Engineer

Location: India (Hybrid/Onsite)

Job Description:

• Strong in digital IP design using RTL for lower technology nodes [3/4/7nm].
• Experience in micro architect and implementation of complex IP blocks for high-speed designs.
• Optimization of digital logic by analysing timing reports at various stages of ASIC design cycles and defining solutions for path.
• Experience in developing modules for AXI4/5, CHI interfaces.
• Experience in RTL implementation of PCIe/CXL transaction layer or AXI bridging layer.
• Experience in the closure of RTL blocks with quality checks, CDC/RDC/Lint.
• Define and propose innovative solutions to the problem.
• Good team player, proactive in communications, lead proposed solutions to closure.
• Documentation on design approaches, discuss it within the team, come up with conclusive approaches and drive it.
• Co-work with other functional teams on project requirements.

Experience (years) : 4+ years

Education Qualification:

BE/B-Tech/ME/M-Tech degree in Electronics and Communication, Electrical Engineering, or related field

AL/ML Engineer

Location: Hyderabad

Job Requirement:

• Proficiency in Python and at least one additional language
• Experience with C/C++, Java, C#, Bash, PowerShell
• Hands-on experience implementing functionality beyond standard libraries
• Experience in building/training models using PyTorch, TensorFlow, TorchRL
• Knowledge of LLMs, multimodal models, computer vision
• Experience with SQL, Windows/Linux (Debian, RHEL) troubleshooting
• Understanding of QA and CI workflows
• Strong knowledge of Windows OS internals, device manager
• Experience with debugging and issue isolation in Windows kernel and driver modules
• Good understanding of PC hardware, SoC, chipsets, graphics cards, BIOS, VBIOS
• Strong analytical, problem-solving, and OOP skills
• Good verbal & written communication skills
• Positive attitude and ability to deliver on next-gen technology

Experience (years) : 2 - 4 Year

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Devops Engineer

Location: Bangalore

Job Description:

• Manage IP and release processes • Migrate repositories from ClearCase to Git or Perforce

• Set up CI/CD pipelines on top of the chosen SCM • Run and maintain automated tests and sanity checks Required Skills

• Strong experience with Git / GitLab / Perforce (preference in that order)

• Hands-on with Jenkins (pipeline creation, admin, troubleshooting)

• GitLab Runner or similar CI runners

• Unix/Linux environment familiarity

• Scripting in Python is Must

Job Requirement:

• Manage IP and release processes

• Migrate repositories from ClearCase to Git or Perforce

• Set up CI/CD pipelines on top of the chosen SCM

• Run and maintain automated tests and sanity checks Required Skills

• Strong experience with Git / GitLab / Perforce (preference in that order)

• Hands-on with Jenkins (pipeline creation, admin, troubleshooting)

• GitLab Runner or similar CI runners

• Unix/Linux environment familiarity

• Scripting in Python is Must

Experience (years) : 3+ Year

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Multimedia- Video/V4L2

Location: Hyderabad

Job Description:

• Experience in Android and Linux Multimedia frameworks and Linux Kernel development with a focus on V4L2. Experience in Java/perl/python programming.
• Knowledge of software design patterns and multi-threaded programming.
• Knowledge of computer architecture, operating systems, data structures, and basic algorithms, particularly with respect to Linux/Android platforms.
• Software debugging skills in embedded real time operating systems, preferably on Linux platforms
• Additional experience in one or more of the following areas:
• Video usage models including playback, streaming, camcorder, WiFi display, and content protection
• Video compression standards (e.g. H264/H.265/AV1)
• Streaming protocols and implementation (e.g HLS/HTTP/DASH)
• Linux device driver development and debugging (e.g. V4L2)
• Expertise in working with tools and techniques used on Linux (Windbg, JTAG, etc.)
• ARM or other embedded SoC development and debugging

Job Requirement:

• Bachelors\Master’s degree in Engineering, Information Systems, Computer Science, or related field 3-5 years of experience with Programming Language such as C, C++, Java, Python.

Experience (years) : 3+ Year

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Multimedia Audio DSP

Location: Hyderabad

Job Description:

• Experience of 3+years or more on any DSP/Embedded processor with proficiency in C/C++ programming, computer architecture, operating systems and some of the below areas :
• Knowledge of multi-threaded programming.
• Strong software debugging skills in real time operating systems, preferably on DSP platforms.
• Audio use cases (e.g. playback, recording and streaming, etc.).
• Voice use cases (e.g. CS and PS calls).
• Optimization for MIPS, Memory,Audio/speech pre/post processing (e.g. Echo cancellation, Noise suppression, Audio Effects) Audio/speech compression standards (e.g. MP3, AAC, FLAC, AMR, EVS, etc.).
• Android Audio HAL and framework knowledge

Job Requirement:

• Bachelor’s degree in Engineering, Information Systems, Computer Science, or related field and 3+ years of Software Engineering or related work experience.
• 3+ years of academic or work experience with Programming Language such as C, C++, Java, Python, etc.

Experience (years) : 3+ Year

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Analog Circuit Design

Location: India (Hybrid/Onsite)

Job Description:

• High speed DDR IO Circuit Design JD: (Experience level 2 year to 6year)
• Strong fundamental in Circuit design. Knowledge of finfet.
• Work experience in high speed transreceiver, Prior work experience in high speed TX, RX.
• Knowledge of ESD, Latchup.
• Experience in layout related issue. Strong debug capability.
• Experience in .lib/Verilog view generation and validation.
• Scripting knowledge is Plus.

Skills/Experience:

• Experience with high speed circuits like serializer, deserializer, Rx, Tx,PLL, ADC etc
• Strong VLSI Fundamentals, Circuits design & Digital Systems deep submicron CMOS design based on FinFETs technology.
• Solid fundamentals in circuit analysis and Clock/Memory Circuit design.

Experience (years) : 2+ Year

Education Qualification:

BE/B-Tech/ME/M-Tech degree in Electronics and Communication, Electrical Engineering, or related field.

IO Layout

Location: India (Hybrid/Onsite)

Job Description:

• Very Good Knowledge on GPIO layouts and performing Layout verifications.
• Good Exposure to Technologies of GF 55nm , UMC 55nm , TSMC 28nm, TSMC 12nm etc.
•  Should have Solid experience in Layout design and Verifications of all the blocks of a GPIO library like Driver, predriver, receiver, ESD clamps.
•  Should be in position to technically drive the Layout Implementation starting with floorplanning, placement , IO ring Implementation , IO Bus design .
•  Very good hands on knowledge on the Cadence Virtuoso layout verification suite relevant to the above mentioned technologies.
•  Very good understanding of ESD & LU concepts and corresponding Layout Implementation strategies and challenges.
•  Working (hands on) knowledge of Linux OS and Unix Shell & PERL scripting will be a plus.
•  Good team player in a multi-site work environment
•  Working knowledge with load sharing systems like LSF will be a plus. Very Good Knowledge on GPIO layouts and performing Layout verifications.
•  Good Exposure to Technologies of GF 55nm , UMC 55nm , TSMC 28nm, TSMC 12nm etc.

 

Experience (years) : 3+ Year

Education Qualification:

BE/B-Tech/ME/M-Tech degree in Electronics and Communication, Electrical Engineering, or related field.

PMIC Characterization

Location: Bangalore, Hyderabad, Noida

Job Description:

• Good knowledge on PMIC (power management IC) hardware validation engineers.
• NPU Architecture: Broadcom – preferable – Qumran/Jericho family
• Labview expertise is a good to have expertise.
• Good understanding of Switching and Linear Voltage Regulators

Experience (years) : 2 - 7 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

FPGA Design Engineer

Location: Bangalore, Hyderabad, Noida

Job Description:

• Good Experience with Xilinx FPGA.
• Should be well aware of RTL logic.
• Well versed with Vivado tool and associated IP’
• Well versed with LUT considerations in FPGA design
• Well versed with FPGA simulation and testing methods
• Well versed with FPGA debug using Xilinx JTAG debugger

Experience (years) : 3 - 12 Years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Emulation Engineer

Location: Bangalore, Hyderabad, Noida

Skills/Experience:

• Create emulation models from RTL / Netlist.
• Expertise in mapping designs to Zebu/Palladium/Haps emulation, improving model performance.
• Knowledge of the Palladium flow and experience in migrating design on Palladium.
• Good knowledge of runtime and debug skills.
• Identifying signals and taking wave dumps on palladium platforms and analyse the failures.
• Exposure to ARM/ARC cores and its architecture
• Exposure to AMBA bus architectures like AXI/AHB/APB
• Exposure to bug tracking tools like Jira and version control tools like Github, Bitbucket, GIT
• Exposure to Flash(NAND) and HDD(Hard disk) like storage technologies.
• Experience with Palladium like emulation platforms(Veloce or Zebu or Haps)
• Understanding of JTAG based debuggers

Experience (years) : 3 - 12 Years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Physical Verification Engineer

Location: India (Hybrid/Onsite)

Job Description:

• Hands on experience in Tessent DFT RTL insertion, DRC checks and debug is a must.
• Hands on experience on Scan Insertion, ATPG, GLS debug, MBIST pattern generation and validation.
• Working knowledge of timing enabled GLS and related debug.
• A basic understanding of DFT IPs like OCC, EDT, SSN, MBIST controllers, IJTAG, IEEE 1600 standard, and Boundary scan.
• Should be able to handle tasks independently.
• The candidate needs to have good debug skills and should be able to communicate related issues to the larger team.
• Working knowledge of TCL is an add-on.

Skills/Experience:

• Hands on debugging skills in different physical verification checks like LVS, DRC, ERC, PERC, Antenna, ESD and DFM using Calibre, ICV and Pegasus PV tools
• Knowledge of basic device physics and PV fixing using various PnR tools like Innovus/ICC2 is required.
• Working experience in cutting edge technologies such as 3/4/5nm and 7nm process nodes is desired

Experience (years) : 4+ Year

Education Qualification:

B-TECH/M-TECH in Electrical/Electronics/Computer Science Engineering or Equivalent

Linux Device Driver

Location: Bangalore, Hyderabad, Chennai, Pune

Job Description:

• Exposure to some CPU arch like ARM or x86 or powerpc etc
• NPU Architecture: Broadcom – preferable – Qumran/Jericho family
• 5+ years of active hands-on work with C/C++ with proficient skills
• Exposure to linux device driver programming/ Kernel development /kernel programming is required.
• Good hands-on experience with SW programming language like C and scripting languages like Python, TCL/TL. Network Device driver experience
• Familiarity with Device Driver Development, integration and testing
• Knowledge of OS e.g Linux kernel, drivers and it’s file system etc.
• Good knowledge with SQA process
• Excellent problem-solving and interpersonal skills.
• Good communication skills, verbal and written

Experience (years) : 5-10 years

Education Qualification:

BTECH/MTECH in Electrical/Electronics/Computer Science Engineering or Equivalent